Gasoline Single Cylinder 4 Stroke 31CC 1HP Gasoline Brush Cutter

Description

The brush cutter is divided into electric power and internal combustion power according to different powers. Internal combustion power is divided into two-stroke and four-stroke gasoline engines; according to different transmission modes, it is divided into flexible shaft transmission and straight rod transmission.

According to the fuel supply mode of the engine, it is divided into float type and pump membrane type. There are two types of working heads for brush cutters: blades and nylon heads. The blades are used when the working environment is good and there are no stones or other debris. On the contrary, it is safer to use nylon heads.

Check before operation

1 Check whether the safety device is firm, whether the screws and nuts of each part are loose, and whether the fuel leaks. Especially whether the installation screws of the blades and the screws of the gear box are tight, if they are loose, they should be tightened.

2 Check whether there are wires, stones, metal objects and other debris that hinder the operation in the work area.

3 Check whether the blade has nicks, cracks, bends, etc. Whether there is any abnormal noise, if there is, check whether the blade is clamped properly.

4 When starting, be sure to leave the brush cutter off the ground or a place with obstacles.

5 When starting the engine, make sure that there are no people around. Make sure that the blade is off the ground before starting.

6 The choke door should be opened when the temperature is low, and the choke door should not be used when the car is hot.

7 First slowly pull out the starting rope until it stops moving, and then pull it out quickly and forcefully after it bounces back.

8 When there is no load, the throttle should be moved to idle speed or low throttle position to prevent runaway; when working, the throttle should be increased.

9 Do not start the engine indoors.

Specification

Advantage

1. Comfortable handle and powerful engine

2. Thicken the aluminum alloy operating lever

3. Enhanced version fixed seat

4. Thicken the working head of new material

5. Light and versatile

　　Chongqing Chinabase Import & Export Co., Ltd., a joint-stock company since 1999, was mainly a manufactuer and trader of various industry including Medical Device, Pharmaceutical Chemical, Agricultural Machinery etc.

　　We are headquartered in Chongqing, with branches and offices located all over the world: Hong Kong, Vietnam, Turkey, Kenya, Indonesia, etc. authenticated with the Quality Management System of ISO9001:2015 and AEO. Meanwhile, in order to provide better services, we have also invested a lot in ERP and OA systems.

　　"HONEST COOPERATION AND EXCELLENT SERVICES" is our motto. We are confident to be your preferred partner worldwide.